Library

We have an extensive library of various bOS configuration examples. Select your heating pump, AC, TV or almost any other device and import it to your smart building configuration. We also encourage all system integrators and DIYs to add their own examples to ComfortClick library.

The DK-RC-MBS-1 interface allows a complete and natural integration of Daikin air conditioners into Modbus RTU and it allows total control and supervision. In this example, users can use the pre-built visualization panel to control the air conditions (ON/OFF, change temperature set-points, fan speeds, and so on), and they will also be able to track all current settings and values of the device.

• Manufacturer: Intesis
• Product name: IntesisAC Domestic units to Modbus Interface
• Product code: DK-RC-MBS-1
• Website: IntesisBox
• Manual: Intesisbox manual

Device preparation

Connect the Intesisbox to power and Modbus RTU. For detailed explanation for initial wiring, follow the instructional manual. Make sure the correct RTU settings are set (select correct COM port in the RTU settings).

Configuration

Download the example from our website and import it into your configuration. Step by step instructions on how to import are available in our instructional video.

When the example is added into the Comfortclick project, correct RTU settings need to be set in order to connect to the device. Modbus addresses provided in the example should provide correct information from the device. If the device shows different feedback, address numbers can be tweaked according to device's manual.
Additional addresses can be added if required, they are all available in the official manual of the device.